

The XL-HD3535HIRC-T4A2 is a 3535-packaged infrared emitting diode (850nm), with dimensions of 3.5 × 3.5 × 1.6 mm. It uses a 3535 EMC base and is packaged with colorless, transparent resin. It emits infrared light at 850nm, which is invisible to the eye. The product meets ROHS requirements, has a moisture sensitivity level (MSL) of 3, and is suitable for reflow soldering processes.

Packaging and Appearance: 3535 EMC package, size 3.5×3.5×1.6 mm, colorless transparent colloid, MSL level 3, RoHS compliant.
Absolute Ratings:
Power Dissipation Pd: 1000 mW
Maximum Continuous Forward Current IF: 700 mA
Forward Pulse Current IFP: 2000 mA
Reverse Voltage VR: 5 V
Operating/Storage Temperature: -40 to 85℃
Reflow Soldering Temperature: 255℃/6s
Junction Temperature Tj: 115℃
Optoelectronic Parameters (IF=350mA, Ta=25℃):
Luminous Intensity Ie: 180–300 mW/Sr (typical 200 mW/Sr; bins P2-5: 180–200, P2-6: 200–300)
Peak Wavelength λp: typically 855 nm
Half Width Δλ: 35 nm
Forward Voltage VF: 1.4–2.3 V
Viewing Angle: 120°
Reverse Current IR: ≤10 μA (VR=5V)
Wavelength Bin: TR03 (840–850 nm), TR04 (850–860 nm)
Voltage Bin: M17-5 to M18-4, covering 1.4–2.3 V
Process and Usage Notes: Suitable for reflow soldering; for manual soldering, it’s recommended to use a soldering iron below 30W, temperature under 300℃, and solder each electrode only once for no more than 3 seconds; avoid applying mechanical pressure or scratching the colloid.
Medical Equipment
Infrared Remote Control
Camera Surveillance Heads
Industrial Control: Counters, Thermal Imaging, Smart Meters
Infrared Photoelectric Switch
Wireless Communication and Signal Transmission
Smart Cars and Robots

