XL-N1608SURSYGC is a red & super yellow-green dual-color SMD LED in 0603 package (1.6×0.8×0.6mm) with clear encapsulation. It supports independent control of red (SUR) and yellow-green (SYG) emissions.
RoHS compliant and moisture sensitivity level MSL 3, it is suitable for automated SMT production. Featuring low power consumption and a wide 120° viewing angle, it satisfies dual-color indication and status display requirements.
Marked as “inner lead”, this model generally adopts an internal pin configuration for independent dual-color control (common cathode / common anode depends on specific circuit design).
Optical Characteristics
Red Chip
Dominant Wavelength (λd): 615~635nm (typical peak: 620nm)
Luminous Intensity (IV): 120~240mcd @20mA (binning details in datasheet)
Full Width at Half Maximum (Δλ): 18nm typical
Yellow-Green Chip
Dominant Wavelength (λd): 565~575nm (typical peak: 570nm)
Luminous Intensity (IV): 70~160mcd @20mA (binning details in datasheet)
Full Width at Half Maximum (Δλ): 17nm typical
Viewing Angle (2θ₁/₂): 120° (wide viewing angle)
Electrical Parameters (Ta=25℃)
Red Chip
Maximum Power Dissipation (Pd): 50mW
Maximum Continuous Forward Current (IF): 20mA
Forward Voltage (VF): 1.8~2.4V @20mA
Yellow-Green Chip
Maximum Power Dissipation (Pd): 50mW
Maximum Continuous Forward Current (IF): 20mA
Forward Voltage (VF): 1.8~2.4V @20mA
Peak Pulse Forward Current (IFP): 80mA (pulse width ≤0.1ms, duty cycle ≤1/10)
Maximum Reverse Voltage (VR): 5V
Reverse Current (IR): ≤10μA @VR=5V
ESD Withstand Voltage: 2000V (Human Body Model)
Environmental & Reliability Specifications
Operating Temperature: -30℃ ~ +85℃
Storage Temperature: -40℃ ~ +90℃ (higher upper limit than monochrome versions)
Soldering Conditions: Reflow soldering ≤260℃ for ≤6s; manual soldering ≤300℃ for ≤3s
Passed 1000-hour operating life test, thermal cycling and thermal shock tests
Additional Features
Supports binning for brightness, voltage and wavelength for consistent mass production
Standard EIA tape-and-reel packaging for high-speed SMT assembly
Moisture-proof and anti-static sealed packaging; recommended for use within 7 days after opening
Electronic Displays: Dual-color indication, status indicators
Indicator Lamps: Equipment status indication, alarm indication
Indoor & Outdoor Lighting: Decorative lighting, signal lighting
Mobile Phone Backlighting: Keypad backlighting, indicator lights
Electrical & Electronic Indicators: Home appliances, instrument panels
Mobile & Digital Devices: Charging indication, notification lights
