A national high-tech enterprise specializing in the research and development, production, and sales of light-emitting diode products
XL-DC10SRBC
XL-DC10SRBC

XL-DC10SRBC is a common-cathode seven-segment LED display (non dot-matrix, figure-8 or dual figure-8 segment display device) with red emission and black face. It has outline dimensions of 25×10×8 mm (1-inch digit height).


It adopts solid potting encapsulation, featuring compact size, light weight and excellent shock resistance.


The device can be driven at low voltage and low current, with ultra-short luminous response time (<0.1 μs), high brightness and service life exceeding 50,000 hours. It is suitable for various electronic equipment requiring numeric display.

Product Characteristics

Display Performance

Emission Color: Red

Face Color: Black (high contrast)

Luminous Intensity (IV): 260 mcd typical (@20 mA, slightly lower than the 720 mcd of dot-matrix types, which is typical for segment displays)

Dominant Wavelength (λd): 620~630 nm (typical peak: 625 nm)

Full Width at Half Maximum (Δλ): 35 nm (slightly wider than the 20 nm of dot-matrix types)


Electrical Parameters (Ta=25℃)

Maximum Power Dissipation (Pd): 50 mW

Maximum Continuous Forward Current (IF): 20 mA

Maximum Pulse Peak Forward Current (IFP): 80 mA

Maximum Reverse Voltage (VR): 5 V

Forward Voltage (VF): 1.8~2.4 V (@20 mA)

Reverse Current (IR): ≤10 μA (VR=5 V)


Structure & Reliability

Common cathode configuration (common terminal connected to negative)

Operating Temperature: -30℃ ~ +70℃

Storage Temperature: -40℃ ~ +85℃

Soldering Conditions: Wave soldering ≤240℃ for ≤3 s; manual soldering <250℃

Solid potting encapsulation, vibration-resistant and highly stable

Supports continuous scanning drive with wide viewing angle


Usage Recommendations

Constant-current drive is recommended. Current-limiting resistors shall be connected in series for each segment and decimal point.

For dynamic scanning operation, the average current is 4~5 mA and the peak current shall not exceed 100 mA.

ESD protection and moisture prevention should be observed during application.

Product Application

Home Appliances: Digital panels for microwave ovens, air conditioners, washing machines, etc.


Medical & Healthcare Devices: Thermometers, blood pressure monitors, etc.


Smart Home: Smart control panels, thermostats


Bluetooth Speakers: Volume and mode indicators


Industrial Control: PLCs, counters


Automotive Instruments: Digital displays for speed, fuel level, etc.